How should we do if the smart USB power strip gets water?
With more and more appliances in the home, the demand for usb power strip has also increased, so extension power board has become an indispensable thing for us. One extension power board can easily solve the problem of charging multiple electrical appliances. So what to do if water is drained during the use?
1.When the smart usb power stripis found to have water, first turn off the power and do not leave the power on.
2.If the casing of the smart USB power stripcan be disassembled, remove it and wipe it to dry. If it cannot be disassembled, blow it with electric hot air from top to bottom. Stop it every 2-3 minutes. It can be used twice after drying.
3.But if the situation is serious, take a cotton swab to absorb water after disassembling the panel. After the water is saturated, wrap the cotton again and then dry it and reinstall it.
4.If the dripping liquid is corrosive liquid such as laundry detergent, dishwashing liquid, etc., still use cotton swabs first, but the cotton swabs must be moistened with water, and then dried after being cleaned. It is recommended to wipe the cotton swabs with rust.
The precautions for using the power strip.
1.The total power of the connected appliances must not exceed the rated power of the plug-in unit. If the wire is relatively long during use, stretch the wire as much as possible and do not bind the wire to avoid abnormal overload.
2.When in use, insert the extension power boardcompletely to facilitate the stable operation of the appliance and prevent electric shock accidents.
3.Pay attention to the use environment of the USB power stripand try not to use it in a humid environment. If it cannot be avoided, take certain isolation measures for the socket. Otherwise, it will be easy to short circuit or open circuit when it encounters water.
4.Check the inside of the power strip socketbefore use. If there is water in the power stripand dirt is stuck, it is best to clean it before use.
5.Do not touch the socket when your hands are wet. You can set some extension boardwith switches to cut off the power without pulling the plug.
6.Pay attention to the purchase of genuine power strip, whether it is a big brand or a small brand, as long as it is a qualified product, there will generally not be a big problem. Even if there is a problem, there will be good after-sales protection.
7.Read the instructions carefully before using the power strip, and clarify the precautions. Usually, manufacturers of size will accompany a package with an instruction manual, the corresponding product materials, shelf life, use operations, and precautions will be explained in detail.
8.Regularly check the use of the power strip and replace it if found abnormal. It is not necessary to turn off the main power for a long time.
9.If there is water in the socket, you have carefully treated it with your method, and then you have to reinstall it and continue to use it directly. This method is not desirable. Should be checked by a professional, if it is found that the temperature of the power stripis too high or there is ignition, the plug is not in good contact with the socket, when the plug is too loose or too tight, it should be stopped and repaired or replaced to ensure safety.
Our website: https://smartusbpowerstrip.com
Contact person: Lisa Liu
Tel.:86 752 2277 856
Fax:86 752 2277 956
Mobile: 86 139 2463 3006
Email: lisa@jishungroup.com.cn
Business QQ: 2850667310
Skype:jishun-lisa
We chat/What’s App/Viber ID:13924633006
评论
发表评论